PRICE

2.007,000 VND / Carton (20Kg)

414,000 VND / Carton (4Kg)

117,000 VND / Can (1Kg)

PRODUCT DESCRIPTION

High quality waterproofing KOVA CT-11A Plus Flooring prevents water absorption, suitable for projects such as basements, water tanks, swimming pools, terraces, floors, walls, sills, floors. hygiene, etc.

- Anti-moss mold, peeling

- Resistant to abrasion and salt water

- Protect and prevent water from seeping into the surface perfectly

EXCEPTIONAL CHARACTERISTICS

• Perfect floor protection, preventing water from seeping into the surface.
• Excellent bonding with concrete, cement mortar.
• Wear resistance, salt water resistance, high alkali resistance.
• Very high durability over 15 years.
• Does not contain lead, mercury and other toxic chemicals, safe for construction and use.

PRODUCT INFORMATION

Surface applied

Terrace, sampan, balcony, toilet floor, kitchen floor, basement, swimming pool, footwall, concrete or cement mortar surfaces.

Thickness

The thickness when dry is 200 - 250 microns (per layer) under normal construction conditions.

Theoretical surface drying time

2 hours, depending on weather conditions.

CONSTRUCTION GUIDE

Surface preparation

• Old surfaces must be removed to remove grease, moss, old paint layers, chalk dust and weathered cement layers.
• The surface of new cement and concrete mortars must be sufficient and free of peeling, for the floor, it is necessary to stabilize the mortar structure (at least 21 days). Then proceed to paint high-quality waterproofing KOVA CT-11A Plus Flooring.
• Moisten the surface before application to high quality waterproofing KOVA CT-11A Plus Flooring good adhesion.

Construction

• Step 1: Prepare the mixture according to the following ratio:

1kg of cement: 0.5 liter of water: 1kg of high quality waterproofing KOVA CT-11A Plus Flooring.

Mix thoroughly before the mixture of cement and water. Then mix cement and water mixture with high quality waterproofing KOVA CT-11A Plus Flooring. The mixture after mixing must be used up within 1 hour, until mixed there.

• Step 2: Apply 2-3 coats of CT-11A, every 6 to 8 hours apart. Allow surface to dry for at least 5 days before applying other works.

NOTE

• High quality waterproofing KOVA CT-11A Plus Flooring reaches absolute hardness after 7 days.
• High quality waterproofing KOVA CT-11A Plus CT-11A floor under slight back pressure if applied 3 layers (in a position such as: pool, water tank, basement floor or footwall)
• If the construction surface has cracks, must apply CT-14 elastic waterproofing first.
• To protect the high-grade KOVA CT-11A Plus Flooring, Flooring should be rolled on top of mortar. This grout should mix KOVA CT-11B waterproofing admixture at a rate of 4-5kg CT-11B for 1m3 pond.
• If the KOVA CT-11A Plus waterproofing layer has been mixed with a mixture of cement and water, it must be used within 1 hour, because after that time the product will be frozen. Where to mix cement there.
• Mixing the right ratio of 1kg of cement: 0.5 liter of water: 1kg of high quality waterproofing KOVA CT-11A Plus Flooring.
• Surface drying time 2 hours
• Construction class 2 after 6-8 hours

SAFETY, HEALTH AND ENVIRONMENT INFORMATION

Working environment must be well ventilated. Avoid contact with skin or eyes. Wear gloves, mask and eye protection during construction. In case of contact with eyes, wash with plenty of clean water and seek medical advice immediately. Please refer to new technical and safety documents before use.