PRICE

349,000 VND / Carton (5Kg)

1,387,000 VND / Carton (20Kg)

PRODUCT DESCRIPTION

KOVA CN-06 roof heat-resistant exterior paint is a two-component coating made from Hydrophobic Monomers, resistant to moisture thanks to its hydrophobic properties in molecular formula, good adhesion on all surfaces. concrete, cement, brick surface. Helps prevent heat transfer and light reflection thereby helping to prevent heat to the roof floor.

EXCEPTIONAL CHARACTERISTICS

• Form a sustainable network with concrete and cement due to the association with the free OH groups in cement.
• Insulating, anti-heat for roof floors.
• Has anti-crack, waterproof, anti-alkali effect.
• Withstands humid environment, waterproofing against light back pressure for foot walls, yellowed walls, floors.
• Against the phenomenon of water penetrating the zoang.
• Protect and create high adhesion to mortar.
• Compatible with all types of paints and surface materials.
• Quick dry, easy to use, high economical because the flat surface discharge less loss.
• Non-flammable, non-toxic, lead-free, mercury free and other hazardous chemicals, safe for construction and use.

PRODUCT INFORMATION

Surface applied

Surface concrete, cement, bricks.

Theoretical norms

1.0 - 1.5m² / kg for 2 layers depending on material surface

CONSTRUCTION GUIDE

Surface preparation

• All surfaces must be dry and free from dirt, grease, moss, lime, and old paint.
• For new walls or new floors, it takes a minimum of 12-15 days for the cement structure to be stabilized before proceeding with the mastic coating.
• If the weather is too dry, damp the walls or floors with a roller or damp cloth before applying.

Construction

• Step 1: Mix the flour additive (component B) into the liquid component (component A) into a homogeneous paste. If the mixture can be mixed with enough water to make it easy to apply (When mixing the two components, the application must be done within 1 hour, after that time the paint will harden and the quality will decrease. there).
• Step 2: Apply 1-2 layers of anti-heat, each layer is 6-8 hours apart (can be left overnight).
• Step 3: Sanding the construction surface is smooth and smooth. Wipe off dust, allow to dry for at least 8-12 hours before applying paint

NOTE

Allow the paint to dry for at least 1 day before applying the next steps. If the paint is too dry or too dense, add 5-10% water during use

SAFETY, HEALTH AND ENVIRONMENT INFORMATION

Working environment must be well ventilated. Avoid contact with skin or eyes. Wear gloves, mask and eye protection during construction. In case of contact with eyes, wash with plenty of clean water and seek medical attention. Please refer to the latest technical and safety documentation before use